Current: Continuous duty DC motor current of 4 amps max. (Note: Higher instantaneous starting current will not harm control module.)

Voltage: Maxium AC voltage input into control should not exceed 20% over the rated AC rms input voltage.

Line Variation: ± 5% without affecting motor speed.

Motor Voltage: Three different models cover motor voltages ranging from 6 vdc to 30 vdc.

Fusing: 4 amperes max. Slo-Blo fuses in both lines to motor. (Supplied by customer)

Control Element: 5K ohm potentiometer, 0.5 watts. (Supplied by customer)

Connection Method: Designed for standard double grip connectors or soldering to terminals.

Speed Control: As low as +/- 2% for full range motor operation and as low as 1% for mid-range motor operation.

Motor Speed: 200 to 22,000 rpm, depending on motor model. Gearmotors can approach .005 rpm, depending on reduction ratio of the gearbox.

Temperature Range: -55^o C to +60^o C.

Protection: Internal components encapsulated in high-density, heat-conductive epoxy. Each control is environmentally protected and virtually impervious to shock, vibration, moisture and dust.

Mounting Method: Can be bolted down through 3/16" wide slots (2) iin the sides of the control.

Weight: Approximately 3 oz.