Current: Continuous duty DC motor current of 10 amps max. (Note: Higher instantaneous motor start-up currents will not harm the control).

Voltage: Maxium DC voltage input into control should not exceed 20% over the nominal voltage rating of motor.

Line Variation: ±5% without affecting motor speed.

Motor Voltage: Four different models cover motor voltages ranging from 12 vdc to 80 vdc.

Fusing: 10 amps max. Slo-Blo fuses in both lines to motor. (Supplied by customer)

Control Element: 10K ohm potentiometer rated for 0.5 watts or 0-5 vdc external control from computer. (Supplied by customer)

Connection Method: Designed for simple screw-down connections

Speed Control: As low as ± 2% for full-range motor operation and as low as ±1% for mid-range motor operation.

Motor Speed: 200 to 22,000 rpm, depending on motor model. Gearmotors can approach .005 rpm, depending on reduction ratio of the gearbox.

Temperature Range: -40^oC to + 75^oC.

Protection:Internal components encapsulated in high-density heat conductive epoxy. Each control is environmentally protected and virtually impervious to shock, vibration, moisture and dust.

Mounting Method: Can be bolted down through 0.19" diameter holes in frame of control.

Approximately Weight: 13 oz.