Voltage: 6, 12, 27, 50 and 75 VDC units are standard. Other direct current voltages available .

Speed: Motor input speeds up to 16,800 RPM can be used to drive this precision planetary geartrain, of ratios from 3.81 to 19,841.

Connection Method: Solder terminals are standard.

Rotation: Counter clockwise when viewed from shaft end, when positive lead (terminal) is plus and negative lead (terminal) is minus.

Reversibility: Unit reverses rotation when voltage is reversed.

Rating: 1/65 hp with torques to 1250 oz. in.

Gears: Precision manufactured, heat treated steel.

Shaft: Precision ground 416 stainless steel, case hardened.

Bearings: Output shaft supported by two bronze bearings. Needle bearings available for high side load conditions.

Backlash: Less than 3 degrees.

Lubrication: All bearings life lubricated. Special lubes available if required.

Weight: 7 to 14 oz., depending on ratios.