Voltage: 3, 6, 12, 27, and 50 VDC are standard. Other direct current voltages available .

Speed: Motor input speeds up to 16,400 RPM can be used to drive this precision planetary geartrain, with ratios of 3.81 to 19,841.

Connection Method: Solder terminals are standard.

Rotation: Counter clockwise when viewed from shaft end, when positive lead (terminal) is plus and negative lead (terminal) is minus.

Reversibility: Unit reverses rotation when voltage is reversed.

Rating: 1/100 hp with torques to 1250 oz. in.

Gears: Precision manufactured and heat treated.

Shaft: Precision ground 416 stainless steel, case hardened.

Bearings: Output shaft supported by two bronze bearings. Needle bearings available for high side load conditions.

Backlash: Less than 3 degrees.

Lubrication: All bearings life lubricated. Special lubes available if required.

Weight: 6 to 12 oz., depending on ratios.