Voltage: 3, 6, 12, 27, 50 and 115 VDC are standard. Other direct current voltages available .

Speed: Motor input speeds up to 16,700 RPM can be used to drive this precision planetary geartrain, of ratios from 3.67 to 6564.

Connection Method: Double conductor shielded cables, #22 AWG per MIL-W-16878, type E.

Rotation: Counter clockwise when viewed from shaft end, when positive lead (red) is plus and negative lead (black) is minus.

Reversibility: Unit reverses rotation when voltage is reversed.

Rating: .025 hp with torques to 100 lb. in.

Gears: Precision cut, heat treated alloy steel.

Bearings: Output shaft supported by two ball bearings to support overhung loads. Needle bearings available for special side load conditions. All planet gears are mounted on anti-friction bearings.

Backlash: Less than 3 degrees.

Shaft: Precision ground 8620 alloy steel per QQ-S-624, heat treated and case hardened.

Protection: Aluminum parts finished per MIL-C-5541A. Ring gear cadmium plated per QQ-P-416, type 2, class 2.

Lubrication: Motor bearings life lubricated per MIL-G-3278. Gearbox lubricated with grease per MIL-G-23827A. Special lubes are available.

Weight: 17 to 26 ounces, depending on ratios.