Voltage: 12, 27, 50,115 and 180 VDC are standard. Other direct current voltages available .

Speed: Motor input speeds up to 5290 RPM can be used to drive this precision planetary geartrain, of ratios from 3.81 to 170.

Connection Method: Two #18 AWG stranded leads, teflon insulated, 8" long are standard. Terminal type connections are available.

Rotation: Counter clockwise when viewed from shaft end, when positive lead (red) is plus and negative lead (black) is minus.

Reversibility: Unit reverses rotation when voltage is reversed.

Rating: 0.33 hp with torques to 500 lb. in.

Gears: Precision manufactured and heat treated, high nickel alloy steel.

Bearings: Output shaft supported by double shielded ball bearings, but needle bearings are readily available. All planet gears are mounted on anti-friction bearings.

Backlash: Less than 3 degrees.

Shaft: Precision ground 8620 alloy steel per QQ-S-624, heat treated and case hardened.

Protection: Aluminum parts finished with iridite chemical film. Ring gear tin-zinc plated, chromate finish per MIL-C-81562B, class 2, type 2.

Lubrication: Motor bearings life lubricated per MIL-G-3278. Gearbox lubricated with grease per MIL-G-23827A. Special lubricants are available.

Weight: 5.48 to 6.70 pounds, depending on ratios.