|
||
| 2796 Culver Avenue, Dayton, OH 45429 | Phone: 937-294-1041 E-mail: a.nabinger@motortech.com | ||
DC Motor Data: CMR 120A100/101Basic DC Motor Data -Standard Part Numbers
 *The standard production tolerance on no-load speed, stall torque and stall current is +/- 10%. The tolerance on no-load current is +25%. The tolerance on current at rated torque is +15%.
NOMINAL PERFORMANCE CURVES 120A100-11 at 27 VDC
 ORDERING
For standard motors, simply order by using the part number listed above corresponding to the performance required.
Special modifications to the CMR motor are available and are ordered as follows:
1. Reference the closest standard P/N in your order.
2. Call out all the special requirements by stating exactly what is required.
We will then assign a special part number to identify your motor. For quick and accurate processing of future orders, just refer to this number. For complete engineering information on plotting speed/torque and current/torque curves for other armatures, see Bulletin E-1.
|
e-mail website concerns to: webmaster@motortech.com Phone: 937-294-1041 |
