| ELECTRICAL SPECIFICATIONS
Rating: 0.10 hp continuous duty.
Voltage: 12, 27, 50 and 115 VDC are standard. Other voltages are available if required.
Speed: Standard speeds, 4060 rpm to 9600 rpm. Higher and lower variations upon request.
Connection Method: Two #18 AWG stranded leads, teflon insulated, 8" shielded leads are standard. Terminal type connections are available.
Rotation: Direction of rotation is CCW with red lead plus (+) and viewing shaft end.
Reversibility: When input voltage is reversed, motor rotation is reversed instantly. |
MECHANICAL SPECIFICATIONS
Frame: Magnet housing and machined aluminum end-bells with stainless steel bearing seats.
Armature: Varnish impregnated, precision balanced, with diamond turned commutator. Inertia is 4.6 x 10-3 oz.in. sec.2 (max.).
Magnet: Alnico 6.
Bearings: Double shielded ABEC-1 ball bearings. Life lubricated per MIL-G-3278.
Brush-holder: Cartridge type, molded of Durez 1544 with brass insert. Holder is protected by surrounding end-bell casting.
Shaft: Precision ground stainless 17-4 PH, heat treated H-900.
Mounting Method: Either four tapped holes or thru holes depending on flange selected.
Weight: 2.25 lb. (max.). |
